• Steel VaporGenie Coil

• Documentation

• Lifetime Warranty 

This innovative bat-style pipe is made of stainless steel wire coils, precisely manufactured so that they attach by twisting/screwing. The coil pipe comprises 5 coils-two in the bottom (bowl) half, and three in the filter (top) portion. The two halves of the pipe fit together by screwing. 

Features

100% stainless steel construction. There is no wood, aluminum, adhesive or any other material in this pipe (other than the ceramic filter, of course). Therefore, both top and bottom can be cleaned with solvents.

 

The VaporGenie can be completely disassembled by hand, by unscrewing the steel coils. This means the pipe can be thoroughly cleaned, inside and out. The ceramic filter can be removed, and hit with a torch to completely burn off soot if necessary. The glass VG and this coil pipe are the only two pipes that have removable ceramic filters. 

It's thermally insulated, due to an air gap between the inner and outer coils. Therefore, the outer surface does not become hot. The coil pipe stays much cooler than the aluminum Bat VG. 

The VaporGenie uses flame heat very efficiently, since it is so well insulated. This makes it good to use in cold weather. It also means a slightly smaller flame can be used. The coil pipe tends to run hotter than our other pipes, since little heat is lost to the outer surfaces.

FREE USPS Domestic Priority Shipping

The Post Office typically delivers between 2-3 business days after being received. Complementary tracking and delivery confirmation is always included.  

• Width: 3.75"
  Height: 1"
  Weight: 2.3 ounces
  
  Material: Pure Stainless Steel + The Ceramic heating element
  
  Made in USA!
  

The VaporGenie vaporizing pipe is used in a manner very similar to a conventional pipe. That's what makes it so easy to use.

First, the VaporGenie pipe is loaded with a herbal blend, and then the flame filter is screwed onto the pipe. It is important to use loose, shredded tobacco; do not pack.

Then, you inhale from the pipe while supplying flame to the flame filter. The flame filter automatically protects the tobacco from burning. You control the exact temperature by adjusting the amount of flame applied and speed of inhalation. It is important to not touch the ceramic filter with the flame.

By paying attention to the flavors and heat inhaled, you know the temperature, and can adjust flame application accordingly. Experienced VaporGenie pipe users can keep the air stream temperature to within a range of about ± 30F or better. This is sufficient temperature control for vaporization.

Since the VaporGenie pipe is designed for use with flame, the vapor is not as clean as vapor from electronic vaporizers that are properly used (electronic vaporizers often cause burning and produce smoke when used improperly). With the VaporGenie pipe, flame exhaust is inhaled. However, most users do not notice the difference (lighter flames or match flames are much cleaner than smoke). And unlike electronic vaporizers, the VaporGenie vaporizing pipe is as portable as a conventional pipe, is less expensive, requires no heat-up time, and is more reliable. There are no electronic gizmos that can break in the VaporGenie pipe.

The VaporGenie pipe is an excellent choice for people just starting out with vaporization, and for people who own an electronic vaporizer, but would like to vaporize away from home.