Home > Vaporizers > Portable Vaporizers > vapcap >

VapCap M 2019 Starter Pack
2019 VapCap M Starter Pack by DynaVap
Alternative Views:

Our Price: $119.95

Stock Status: In Stock

Product Code: DYNA.M-START_2019

The following items are included FREE with this product:

VapCap M 2019 Starter Pack by DynaVap

The 2019 VapCap M has been upgraded in every way with increased convection, improved airflow, and enhanced grip, and this starter pack is great for any new DynaVap user!

The 2019 Vapcap M Starter Pack is filled with goodies including a wood DynaStash to carry your new M, a butane lighter, replacement parts to keep it operating smoothly, and some cleaning supplies. You'll be well on your way to mastering the VapCap, just provide the fuel, respect the click and you're set to blast off!

Key Features:

  • NEW ZigZag Air Channels - Increased Convection
  • NEW Chamber Air Inlets - Increased Airflow
  • NEW Geometric Friction Grip
  • NEW Knurled Warning Track
  • NEW Grooved Carb Hole
  • Non-Electric Temp Notification (Click)
  • Stainless Steel Build
  • Sharp Chamber Tip for Direct Loading
  • Butane Torch Heated
  • Reaches Vaping Temp in Seconds
  • No batteries, No charging
  • USA Designed and Constructed

Using the 2019 VapCap M:

The VapCap M sections are friction fit, they can be assembled and disassembled by gently twisting and lifting. Usage technique with the 2019 M is simple but important for optimal results:

  1. Twist off the cap, fill the loading chamber with material (coarsely ground works best) and put the cap back on.
  2. Slowly rotate the VCM while applying heat to the cap using a small jet torch, standard lighter, candle or even a hot stick from a campfire. Anything that can apply adequate heat can be used.
  3. Once you hear the M's cap click it's at the proper temperature. Begin taking your draws; you should get 1-2 draws at the proper temperature before clicking again indicating it's below temperature.
  4. Make sure you wait until you hear the cooldown click before applying more heat. To avoid combustion DO NOT apply more heat before the cooldown click.
  5. Once you hear the cooldown click you can apply more heat until you hear the unit click again indicating it's back up to temperature; you can now take more draws.
  6. Repeat steps 2-5 until your material stops producing vapor for complete extraction.

Included Items:

  • 2019 M
  • DynaStash
  • Butane Torch Lighter
  • Airtight Storage Container
  • Cotton Pipe Cleaners (5)
  • High Temp O-rings (3)
  • Condenser O-rings (2)
  • DynaWax
  • Replacement Steel CCD
  • Butane Torch Lighter Sheath

FREE USPS Domestic Shipping:

The Post Office typically delivers orders between 2-4 business days after being received. Complimentary tracking and delivery confirmation are always included.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
5 of 5 Great hitter November 1, 2019
Reviewer: Clint from OH United States  
This is a great little hitter specially if you are new to vaping

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Great for on the go with no power September 19, 2019
Reviewer: Anonymous Person  
This is the perfect little device for when you don’t have access to electricity. It has a beautiful yet simple design. Slight learning curve but once you get the hang of it you’re set.

Was this review helpful to you?

Browse for more products in the same category as this item:

Vaporizers > Portable Vaporizers > vapcap